Now follow the instructions below to link your keypad to your Genie of Fairview Door opener. Enter the PIN of your choice (3 to 8 numbers) and press PROGRAM.Press and let go in order the 3, 5, 7 and PROGRAM keys.To clear out the factory settings or the previous code, press and hold both the PROGRAM key and the Up/Down arrow keys until the red light on the keypad flashes twice and goes out. (this keypad is off-white with a flip-up cover and the PROGRAM key is above the 2 key) Model 3: Programming instructions for your Genie of Fairview GK-BX Wireless Intellicode Keypad. While the indicator light is blinking enter your PIN number and Press the UP/DOWN arrow button several times ( 3 or 4 ) until the door is activated. Once you’ve set the keypad code go to your Genie of Fairview motor head follow the instructions below: Enter your chosen PIN, anywhere from 3 to 8 numbers and press PROGRAM (the red light should blink twice as fast and turns off, indicating it took your code).To program a new code press and let go in order the 3, 5, 7 and PROGRAM keys.The red light on the keypad will blink once and turn off. To erase the old PIN (Personal Idendification Code) press and hold down, in order, the PROGRAM, 6 and UP/Down Arrow keys. (off-white with flip-up cover – program key above the 3 key) While the indicator light is blinking enter your PIN number and Press the SEND button several times ( 3 or 4 ) until the door is activated. This small black button is always found near the floppy antenna wire and is usually behind the light cover for your light bulbs. Gently press and release the radio receiver Learn Code button on the motor head in your garage to start the red indicator light next to the button will start blinking.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |